How to use:
Follow these steps for proper use of heated targets:
- The package heats up when in contact with air, so do not open the package until you are ready to use it.
- Open the package and remove the heat pad
- Be careful not to cut or damage the heat pad as you remove it.
- Remove the paper strip from the back of the pad to expose the adhesive surface.
- Attach the adhesive side of the pad to the center of the paper target, marked with a circle
- Attention: There is no need to shake the heating pad, it will heat up on its own within 3-5 minutes
- Attach the paper target to the desired location
- Aim at the bearing with a thermal scope mounted on the rifle and adjust the thermal vision so that the bearing is clearly visible.
- Perform the reset procedure as described in your thermal device's user manual.
- Thanks to the round shape and small diameter of the pad, just a few hits are enough to eliminate deviations from the impact point.
Heated Package Features:
Quantities present in the package:
- 10 paper targets, size 30 x 30 cm
- 10 x 40mm activated carbon heat pads (heated surface) with one adhesive side
Bearing heating duration: 10-20 minutes on cold surfaces (varies with weather conditions)
Ingredients: iron powder, activated carbon, vermiculite, salt, resin, water
Shipping to Italy is FREE for orders over €79, otherwise it has a rate of €4.99
You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).
Do you have questions, requests or curiosities about our products? Our Team is always at your disposal. You can contact us 24/7 via Whatsapp, Telephone or E-mail. Whatsapp: Telephone: E-mail:
FREQUENTLY ASKED QUESTIONS
- Choosing a selection results in a full page refresh.
